KTA-150 Mitigation Package Outside with LDVI Couplers

KTA-150 Mitigation Package Outside with LDVI Couplers

$441.99

KTA-150 Mitigation Package Outside–Low Durometer Vibration Isolating

**This product is for exterior fan installations**

The KTA is the original low voltage fan from PDS. The KTA saves time. The power supply box with integral system indicator can be mounted on any wall inside the home where an outlet can be found. From here, the two-conductor cable can easily be routed up to 100 feet away (call for 100 ft system) to the fan. Due to the power being less than 50 volts, most jurisdictions do not require electrical permits. The easy-to-read, panel mounted, needle indicator system senses the airflow of the fan, giving an easy to see reading. If you are a homeowner installing your own system, you will appreciate the simplicity of installing the KTA system. If you are a professional installer, you will appreciate the speed of installation, as well as positive comments from your clients.

Features:

  • 24 volt Class 2 power limiting power supply.
  • KTA 150 fan (See Fan Characteristics for Fantech FR-150).
  • Special Class 2 cable available in 25 and 50 ft. lengths. Call about longer lengths.
  • System operation/failure indicator as required by EPA Mitigation Standards.
  • Triple fail-safe electrical disconnect system at both fan and power supply.
  • Five year limited warranty on fan and meter indicator box
  • Easy to interpret system indicator for homeowner.
  • KTA Meter Indicator Boxes must always be installed inside the home.

 

Low Durometer, Vibration-Isolating KTA-150 Mitigation Package (Outside) includes:

  • KTA-150 Original Low Voltage fan.
  • Electronic system indicator (install inside home).
  • Two LDVI flexible fan to 4″ pipe couplers.
  • 50′ of cable with integral electrical disconnect.
  • Charcoal canister short-term radon test kit & analysis.
  • Alpha Track long-term radon test kit & analysis.
  • Three system CAUTION labels.
  • Hydro-sep water separation device to protect fan longevity.

Description

KTA-150 Mitigation Package Outside–Low Durometer Vibration Isolating

**This product is for exterior fan installations**

The KTA is the original low voltage fan from PDS. The KTA saves time. The power supply box with integral system indicator can be mounted on any wall inside the home where an outlet can be found. From here, the two-conductor cable can easily be routed up to 100 feet away (call for 100 ft system) to the fan. Due to the power being less than 50 volts, most jurisdictions do not require electrical permits. The easy-to-read, panel mounted, needle indicator system senses the airflow of the fan, giving an easy to see reading. If you are a homeowner installing your own system, you will appreciate the simplicity of installing the KTA system. If you are a professional installer, you will appreciate the speed of installation, as well as positive comments from your clients.

Features:

  • 24 volt Class 2 power limiting power supply.
  • KTA 150 fan (See Fan Characteristics for Fantech FR-150).
  • Special Class 2 cable available in 25 and 50 ft. lengths. Call about longer lengths.
  • System operation/failure indicator as required by EPA Mitigation Standards.
  • Triple fail-safe electrical disconnect system at both fan and power supply.
  • Five year limited warranty on fan and meter indicator box
  • Easy to interpret system indicator for homeowner.
  • KTA Meter Indicator Boxes must always be installed inside the home.

 

Additional information

Weight 24.5 lbs
Dimensions 23 x 12 x 12 in